@article { author = {Ghanbari Parmehr, Ebadat}, title = {Experimental analysis of stress and strain using photoelasticity and photogrammetry}, journal = {Journal of Soft Computing and Information Technology}, volume = {8}, number = {3}, pages = {32-39}, year = {2019}, publisher = {Babol Noshirvani University of Technology}, issn = {2383-1006}, eissn = {2588-4913}, doi = {}, abstract = {Measurement and experimental analysis of stress and strain of enforced objects are crucial in the fields of mechanics and civil engineering. The photoelasticity as a conventional method for measurement and analysis suffers from some limitations such as the need for specific transparent material, appropriate equipment and enough experience. In this research, photogrammetry was introduced for the experimental analysis of stress and strain measurement because of its high accuracy, ease and independence to the material of the object. To compare the accuracy of photogrammetry and photoelasticity, a crane hook-shaped object from Araldite epoxy has been tested for different enforcement. In each step, addition to recording the required information for photoelasticity, photos of the object have been taken by a digital camera in a fixed position and orientation. The position of the corresponding points on the object was measured with an accuracy of 0.01 pixel using digital image processing and least square image matching techniques. The measured stress and strain using photoelasticity and photogrammetry were compared with analytical stress and strain measurement method. The results indicated a high accuracy for photogrammetry compared to photoelasticity. Therefore, conventional methods for stress and strain measurements can be replaced by photogrammetry.}, keywords = {Photoelasticity,Photogrammetry,Digital Image Processing,Stress and Strain}, title_fa = {آنالیز تجربی تنش و کرنش به روش فتوالاستیسیته و فتوگرامتری}, abstract_fa = {اندازه‌گیری و آنالیز تجربی تنش و کرنش در قطعات تحت بار و سازه‌ها اهمیت بسیاری در حوزه‌های مختلف علوم مهندسی مانند مکانیک و عمران دارد. فتوالاستیسیته به عنوان روشی مرسوم برای اندازه‌گیری تنش و کرنش دارای محدودیت‌هایی است. این محدودیت‌ها شامل نیاز به استفاده از جسم از جنس خاص، تجهیزات تخصصی و تجربه کافی است. در این تحقیق، فتوگرامتری به عنوان روشی دقیق، آسان و مستقل از جنس قطعه برای اندازه-گیری تنش و کرنش معرفی شده‌است. برای مقایسه دقت فتوگرامتری و فتوالاستیسیته، قطعه‌ای از جنس اپوکسی آرالدیت با شکل قلاب جرثقیل تحت بارگذاری‌های مختلف قرار داده شده و در هر مرحله، علاوه بر ثبت اطلاعات مورد نیاز روش فتوالاستیسیته، عکسبرداری از قطعه با دوربین رقومی با حفظ وضعیت و مکان دوربین انجام شد. با استفاده از تکینیک‌های پردازش تصاویر رقومی و به‌کارگیری روش تناظریابی کمترین مربعات، مختصات نقاط متناظر روی قطعه با دقت 0.01 پیکسل اندازه‌گیری شده و تغییر طول‌های ناشی از کرنش‌های اصلی در نقطه دلخواه از قطعه محاسبه شدند. نتایج حاصل از فتوگرامتری با مقادیر حاصل از کرنش به دست آمده به روش فتوالاستیسیته و آنالیز تحلیلی کرنش در نقطه مورد نظر مقایسه شدند. مقایسه نتایج حاصل از روش‌های مختلف بیانگر دقت بالای روش پیشنهادی برای اندازه‌گیری کرنش است. از این‌رو، روش فتوگرامتری می‌تواند جایگزین روش-های مرسوم اندازه‌گیری کرنش و تنش حاصل از بارگذاری شود.}, keywords_fa = {فتوالاستیسیته,فتوگرامتری,پردازش تصویر رقومی,کرنش,تنش}, url = {https://jscit.nit.ac.ir/article_92728.html}, eprint = {https://jscit.nit.ac.ir/article_92728_490162addfb10b85780a3a201974037f.pdf} }